TLM-185W6
TLM-185W6 is a 18.5″ HD 1366 x768 resolution broadcasting monitor which is suitable for studio monitor at the station or OB truck monitor where needs high quality waveform and vector scope. Comparing to normal waveform and vector scope from other manufacturers at the field now, TLM-185W6 provides sharp edge crystal clear waveform and vector scope which help a camera man or a directors to verify the exact brightness of shooting environment and color variation. And due to its wide 178 degree viewing angle of each side gives a cameraman or director easy job to verify their job.
Industry Standard Color Calibration
TLM-185W6 is precisely color calibrated by industry standards including BT709 and SMPTE with K10, CA210, CA310, Spyder4/5, and Eye On. The relevant firmware for color calibration/correction is supplying to all distributors free of charge.
Super Crystal Waveform and Vector scope
TLM-185W6 might have the world best quality of waveform and vector scope with 256 x 256 box resolution. It has 3 options to show waveform and vectorscope in different sizes, small, middle, and large scaled version.
If you need a high resolution waveform at field job, TLM-185W6 can provide the fairly nice the relevant tools.
"Other features you need"
TLM-185W6 has all necessary the following functions closed caption, UMD, Focus Assist, various powerful marker options, verification of locking status, Time code, gamma selection 1.0 to 3.0, remote control, Tally lamp, 16 channel Audio level meters and so on.
Egronomic Keys
4 key functions can be mapped out as per your preferences.
Flat type keys with light indicators which can be on and off.
Input & Output Connectors
2 SDI in and 1 SDI out, RGB, YPbPr, and Composite Remote Control RS-232 multi monitor controllable Analogue in, Headphone out, and AES/EBU out Mini XLR, 9 Pin Firmware update port.
| Specification | ||||
| Panel Size | 18.5 inch | Panel Resolution | 1366×768 (16:9) | |
| Color | 16.7M | Luminance | 250cd/m | |
| Contrast Ratio | 1000:1 | Viewing Angle | 178 (H), 178(V) | |
| Video Input | SDI x 2 | 270Mbps~3Gbps SDI selected 2channel input | ||
| Analog x 3 | Composite1/2/3, YPbPr, RGB(Sync On Green), S-Video | |||
| HDMI x 1 | 480i/480p/720p/1080i/1080p & VESA/IBM Modes | |||
| Video Output | SDI x 1 | SDI selected channel active through-out | ||
| SDI Input Signal Formats | 2K format | 2048×1080 (23.98psf/24psf/23.98p/24p) | ||
| SMPTE-425M-A | 1920x1080p (60/59.94/50/30/29.97/25/24/23.98) | |||
| 1920x1080i (60/59.94/50) | ||||
| 1280x720p (60/59.94/50) | ||||
| SMPTE-425M-B | 1920x1080p (60/59.94/50) | |||
| SMPTE-292M | 1920x1080i (60/59.94/50) | |||
| 1920x1080p (30/29.97/25/24/23.98) | ||||
| 1280x720p (60/59.94/50) | ||||
| SMPTE-259M | 720x576i (50) | |||
| SMPTE-125M | 720x487i (59.94) | |||
| 3G-SDI Signal format | YCbCr – 4:4:4 10bit / YCbCrA – 4:4:4:4 10 bit / YCbCr – 4:2:2 12bit / YCbCr – 4:4:4 12bit | |||
| RGB – 4:4:4 10bit / RGBA – 4:4:4 10bit / RGB – 4:4:4 12bit | ||||
| Audio Input | SDI embedded audio / HDMI embedded audio / Analog stereo | |||
| Audio Output | SDI de-embedded audio out (AES/EBU) (Phone jack) | |||
| (Selected 2ch out) | Headphone out (stereo) (Phone jack) | |||
| Internal front speakers out (stereo / 2 watt) | ||||
| Remote Control Ports | Serial remote port (RS-422) (In / Through out) | |||
| (RJ-45 x 3) | Parallel remote port (GPI) | |||
| IR Remote | IR remote support (Option) | |||
| Input Staus Display | Input source / Resolution Display | |||
| Current Status Display | User status, Input mode, Resolution, Color temp, Total operating time, etc. | |||
| SDI Signal Status Display | Locking / TRS / EDH / FRC / Video Standard / ANC / HD Line Based CRC / | |||
| HD Line Number Error Detecting | ||||
| Picture Adjustment | Brightness, Contrast, Phase, Saturation, Sharpness control | |||
| Color Temp/Gamma Control | Color temperature / Gamma control | |||
| Picture Aspect Control | 17:9, 16:9, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 4:3, Full screen | |||
| Aspect Ratio Marker | 17:9, 16:9, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 4:3 | |||
| Marker | Safety marking area adjust (80%, 85%, 88%, 90%, 93%, 95% ) | |||
| Box marker can be displayed at any area / any size. | ||||
| Marker feature (Corner, Rectangle) | ||||
| Line thickness adjust (8 steps) | ||||
| Center / Cross | Center marker On/Off & Cross Marker can be displayed at any point | |||
| Marker | Size adjust (30 steps) / Thickness adjust (8 steps) | |||
| Marker Color | Marker color adjust (white, red, green, blue, gray) | |||
| Marker Mat | Darkening outside of aspect marker setting area (7 steps) | |||
| H/V Delay | H/V delay support (SDI / Analog Input) | |||
| Monochrome Mode | Blue only, Black&White mode support | |||
| Scan | Zeroscan, Overscan, Vertical expended, Pixel to Pixel display, etc. | |||
| Zoom Function | Zoom In support (possible to zoom in any area up to 400%), | |||
| Image position H/V adjust when Zoom In is activated | ||||
| Multi-Display Mode | 3 kinds of input video / measurements layout support (SDI mode only) | |||
| Waveform/Vectorscope | SDI Input Video High Resolution Waveform / Vectorscope (TLM-070W6) | |||
| Position / Blend / Size adjust | ||||
| Focus Assist Function | Vertical Line Focus Assist control | |||
| Y-Clip Function | Input Luminance(Y) level Clip Guide (Range Error) control | |||
| False Color Function | Input Luminance(Y) 13 levels color filter function | |||
| Histogram | Input Video White, Red, Green, Blue 4-Color Histogram function | |||
| Timecode | SDI VITC / LTC Timecode display , Size adjust (Big / Small) | |||
| PIP, PBP | PIP/PBP support (PIP small / PIP big / PBP (side by side) / PBP (full) | |||
| SDI-HDMI, SDI-Analog, HDMI-Analog PIP/PBP support | ||||
| UMD | 5-character UMD support, UMD tally function support | |||
| Position adjust (Top / Bottom / Top Left / Top Right / Bottom Left / Bottom Right) | ||||
| Size adjustable (Big / Small) | ||||
| Background / character color adjust (white, red, green, blue, gray) | ||||
| Background transparency adjust (interlocked with OSD transparent control) | ||||
| Audio Level Meter | SDI embedded audio level meter 16ch display on the screen | |||
| Vertical / Horizontal mode support | ||||
| Position adjust (Top / Middle / Bottom) / Size adjust (Big / Small) | ||||
| Audio Control | Volume / Balance control | |||
| Programmable 4 hot keys | Programmable 4 hot keys (dual-key) | |||
| Remote Control | Parallel remote control parameter setup | |||
| RS-422 control using PC software or optional controller | ||||
| OSD Transparency Adjust | OSD transparency adjust (5 steps) | |||
| Multi-user Setting Support | Multi-user (User1, User2, User3) setting save & recall | |||
| Backlight Brightness Control | Backlight brightness control (100 steps) | |||
| Tally Lamp Support | Tally Red / Tally Green (separated / combined control with UMD tally) | |||
| Button Control | Button LED On/Off control / Button Lock function support | |||
| Power Saving Mode | Power saving mode support (On / Off) | |||